T-200
Missile components, tooling and other applications requiring good toughness with high strength. Jet engine shafts.
Composition, nominal wt. %: AL 0.1, C 0.02, MN 0.05, MO 3.0, Ni 18.5, P 0.005,
Si 0.05, Ti 0.7
Specifications: AMS 6518, 6519, 6591, MIL-S-47319.

400
Nickel-Copper solid solution alloy. Equipment for mineral acids, brines, aklalies, offshore engineering, marine applications.
Composition, nominal wt. % : C 0.15, Cu rem 0, Fe 1.2, Mn 1.0, Ni 66.0, S 0.01, Si 0.25
Specifications: AMS 4675, 4730, ASTM B164, B564

500
Pump and drive shafts, impellers, valve components, springs, fasteners, oilwell packers, subsurface safety valves.
Composition, nominal wt. % : AL 2.7, C 0.1, Cu rem 0, Fe 1.0, Mn 0.7, Ni 66.0, S 0.01, Si 0.25, Ti 0.6
Specifications: AMS 4676, ASTM F467, F 468

600
Turbines, nuclear reactor applications, chemical process equipment high temperature fixtures.
Composition, nominal wt. %: C 0.075, Cr 15.5, Fe 8.0, Ni 72.0 min
Specifications: AMS 5665, MIL-N-23229, ASTM B 166, B 167

601
Weld wire, woven wire mesh belts, rod for heat treat baskets, heat treat fixtures.
Composition, nominal wt. %: AL 1.3, C 0.05, Cr 23.0, Cu 0.5, Fe rem, Mn 0.5, Ni 60.5,
S 0.008, Si 0.2
Specifications: AMS 5715, 5870, ASTM B 166, B 167, B 168

625
Combustion systems, FGD systems, pumps, CPI and nuclear heat exchanger tubing.
Composition, nominal wt. %: AL 0.3, C 0.05, Cb 3.7, Cr 21.5, Fe 2.5, Mo 9.0, Ni rem, Ti 0.3
Specifications: AMS 5666, EB 2949, ASTM B 444, B 446

718
Jet engine rings discs, shafts, compressor blades, seals, spacers. Fasteners, nuclear, oil and gas Compartments.
Composition, nominal wt. %: AL 0.5, C 0.02, Cb 5.2, Cr 19.0, Fe rem, Mo 3.1, Ni 54.0, Ti 0.9
Specifications: AMS 5662, 5663, 5664 MIL-N- 24469, RDT M2-18T, ASTM B 637.

800
Corrision-resistant alloy for petrochemical and food processing equipment, tubing, heat exchangers, and furnaces.
Composition, nominal wt. % : AL 0.37, C 0.05, Cr 21.0, Cu 0.37, Fe rem, Mn 0.75, Ni 32.5,
S 0.007, Si 0.5, Ti 0.37
Specifications: AMS 5766, 5871 ASTM B 163, B 407, B 408, B 409, B 515, B 564.

825
Downhole tubulars deep, corrosive wells. Pollution control, scrubber, and radwaste systems. CPI process piping systems.
Composition, nominal wt. % : AL 0.1, C 0.02, Cr 21.5, Cu 2.2, Fe rem, Mn 0.5, Mo 3.0,
Ni 42.0, P 0.01, S 0.01, Si 0.25, Ti 0.9
Specifications: AMS B 163, B 423 B 424, B 425